Part III - List of Documents, Exhibits, and Other Attachments

Section J – Attachment 6: GFI

Table of Contents

1. [Orig]  REFERENCED DOCUMENTS.. 3

2. [Orig]  ORDER OF PRECEDENCE.. 3

Authority: Department of Defense. 4

Authority: U.S. Department of Homeland Security. 5

Authority: U.S. Coast Guard. 5

Authority: Naval Sea Systems Command (NAVSEA) 6

Miscellaneous. 6

3. [Orig]  INDUSTRY PUBLICATIONS.. 7

Title: Standards and Technical Information Reports for Small Craft 7

Authority: International Organization for Standardization (ISO) 7

Authority: The Society of Naval Architects and Marine Engineers (SNAME) 7

Authority: ASTM International (ASTM) American Society for Testing and Materials. 8

Authority: The American Bureau of Shipping (ABS) 8

Authority: American Society of Mechanical Engineers International (ASME) 9

Authority: Illuminating Engineering Society of North America (IESNA) 9

Authority: Society of Automotive Engineers (SAE) 9

Authority: The National Electrical Manufacturers Association (NEMA) 9

Authority: American National Standards Institute (ANSI) 10

Authority: American Welding Society (AWS) 10

Authority: National Fire Protection Association (NFPA) 10

Miscellaneous. 10

1. [Orig]  REFERENCED DOCUMENTS

1.1. [Orig]  Throughout this Solicitation/Contract, where external documents are referenced, the version, amendment, or revision specified in this attachment shall apply.

1.2. [Orig]  Please reference Section L.2 for availability of specifications listed in the GSA index of federal specifications, standards and commercial item descriptions.

2. [Orig]  ORDER OF PRECEDENCE

2.1. [Orig]  The order of precedence is specified in Section I.1, 52.215-8, and in the Specification Section 042-1.5.

2.2. [Orig]  The offeror/contractor shall immediately notify the contracting officer in writing of any perceived conflicts herein.

Authority:   Department of Defense [A00014]

Title	Date
MIL-DTL-31000C - DETAIL SPECIFICATION - TECHNICAL DATA PACKAGES	9-Jul-04
MIL-DTL-24784B SUP 1 - MANUALS, TECHNICAL: GENERAL ACQUISITION AND DEVELOPMENT REQUIREMENTS
MIL-DTL-24784/4B  - COMMERCIAL OFF THE SHELF (COTS) EQUIPMENT MANUAL REQUIREMENTS
MIL-DTL-24784/7B  - TECHNICAL REPAIR STANDARDS (TRS) FOR HULL, MECHANICAL, AND ELECTRICAL (HM&E) EQUIPMENT, AND ORDNANCE EQUIPMENT
MIL-DTL-24784/11B - SHIP INFORMATION BOOK (SIB) REQUIREMENTS
MIL-DTL-24784/12B  - HULL, MECHANICAL AND ELECTRICAL (HM&E) EQUIPMENT AND SINGLE COMPONENT MANUAL REQUIREMENTS
MIL-DTL-24784/17B  - HULL, MECHANICAL, AND ELECTRICAL (HM&E) SYSTEMS AND ELECTRONIC AND INTERIOR COMMUNICATION (IC) SYSTEMS MANUAL REQUIREMENTS
MIL-DTL-24784/20B  - DIGITAL SYSTEMS MANUAL REQUIREMENTS
MIL-DTL-24784/21B  - DIGITAL EQUIPMENT MANUAL REQUIREMENTS
MIL-STD-461E - INTERFACE STANDARD - REQUIREMENTS FOR THE CONTROL OF ELECTROMAGNETIC INTERFERENCE CHARACTERISTICS OF SUBSYSTEMS AND EQUIPMENT	20-Aug-99
MIL-STD-464A  ELECTROMAGNETIC ENVIRONMENTAL EFFECTS REQUIREMENTS FOR SYSTEMS	19-Dec-02
MIL-STD-1310G.  DEPARTMENT OF DEFENSE STANDARD PRACTICE FOR SHIPBOARD BONDING, GROUNDING, AND OTHER TECHNIQUES FOR ELECTROMAGNETIC COMPATIBILITY AND SAFETY.	28-Jun-96
MIL-STD-1623D (SH), NOTICE 1, DATED 3 JULY 1985 - DEPARTMENT OF DEFENSE DESIGN CRITERIA STANDARD - FIRE PERFORMANCE REQUIREMENTS AND APPROVED SPECIFICATIONS FOR INTERIOR FINISH MATERIALS AND FURNISHINGS (NAVAL SHIPBOARD USE).	3-Jul-85
MIL-STD-1680C, Installation Criteria for Shipboard Secure Electrical Information Processing Systems	17 March 1993
MIL-STD-2035A, DEPARTMENT OF DEFENSE TEST METHOD, NONDESTRUCTIVE TESTING ACCEPTANCE CRITERIA.	15-May-95
MIL-STD-721C - DEFINITIONS OF TERMS FOR RELIABILITY AND MAINTAINABILITY	12-Jun-81
MIL-STD-756B - RELIABILITY MODELING AND PRODUCTION	18-Nov-81
MIL-STD-769J - DEPARTMENT OF DEFENSE DESIGN CRITERIA STANDARD  -  THERMAL INSULATION REQUIREMENTS FOR MACHINERY AND PIPING	9-Oct-90
MIL-PRF-16884K - PERFORMANCE SPECIFICATION - FUEL, NAVAL DISTILLATE.	14-Nov-02
MIL-PRF-2104H - LUBRICATING OIL, INTERNAL COMBUSTION ENGINE, COMBAT/TACTICAL SERVICE (FSC 9150).	12-Jul-04
MIL-PRF-24647C - PAINT SYSTEM, ANTICORROSIVE AND ANTIFOULING, SHIP HULL	24-Sep-01
MIL-PRF-28001 - PERFORMANCE SPECIFICATION MARKUP REQUIREMENTS AND GENERIC STYLE SPECIFICATION FOR EXCHANGE OF TEXT AND ITS PRESENTATION	2-May-97
MIL-PRF-49506 - PERFORMANCE SPECIFICATION LOGISTICS MANAGEMENT INFORMATION	11-Nov-96
MIL-HDBK-61A - CONFIGURATION MANAGEMENT GUIDANCE	7-Feb-01
MIL-HDBK-470A - DESIGNING AND DEVELOPING MAINTAINABLE PRODUCTS AND SYSTEMS - VOLUME 1 1	4-Aug-97
MIL-HDBK-881 - WORK BREAKDOWN STRUCTURE	2 Jan 1998
MIL-HDBK-502 - ACQUISITION LOGISTICS	30 May 1997
MIL-HDBK-46855 - HUMAN ENGINEERING GUIDELINES FOR MILITARY SYSTEMS, EQUIPMENT AND FACILITIES	31 Jan 1996
MIL-M-23530A - MOCK-UPS OF MAIN AND AUXILIARY SHIPBOARD MACHINERY SPACES	8 Jun 1978
FED-STD-595B(1) – COLORS USED IN GOVERNMENT PROCUREMENT	11-Jan-94
DD FORM 1423 – EXHIBIT LINE ITEM NUMBER
FED-STD-123G – MARKING FOR SHIPMENT (CIVIL AGENCIES)	6-Jun-97
FED-STD-313 - MATERIAL SAFETY DATA, TRANSPORTATION DATA, AND DISPOSAL DATA FOR HAZARDOUS MATERIALS FURNISHED TO GOVERNMENT ACTIVITIES.	21-Mar-00
DOD 5230.24 - DISTRIBUTION STATEMENTS ON TECHNICAL DOCUMENTS	18 Mar 1987
DODI 6055.11 - “PROTECTION OF DOD PERSONNEL FROM EXPOSURE TO RADIOFREQUENCY RADIATION AND MILITARY EXEMPT LASERS”	6-May-96
NTISSAM TEMPEST/2-95 Red/Black Installation w/Amendment of 03 February 2000	12 December 1995/03 February 2000
OFFICE OF THE UNDER SECRETARY OF DEFENSE “THE PROGRAM MANAGER’S GUIDE TO THE INTEGRATED BASELINE REVIEW PROCESS”	April 2003
Department of the Navy – Information Assurance Shipboard Red/Black Installation Publication	July 2001

Authority:   U.S. Department of Homeland Security

Title	Date
DHS A guide to Privacy Act System Notices

Authority:   U.S. Coast Guard [A00012]

Title	Date
COMDTINST 5260.4A - Coast Guard Privacy Impact Assessment (PIA)	09 Nov 2005
COMDTINST 6260.30  -  Polyurethane Coatings Exposure Control	14-Jan-94
COMDTINST 7310.1I - Standard Rates	22-Feb-05
COMDTINST M2400.1F - U.S. Coast Guard Radio Frequency Plan	8-May-91
COMDTINST M4400.19A, Chapter 1 Supply Policy and Procedures Manual	10-Apr-98
COMDTINST M5215.6E - The Coast Guard Directives System	20-May-2004
COMDTINST M5260.3 - The Coast Guard Freedom of Information and Privacy Acts Manual	14 Jul 1996
COMDTINST M9000.6E - Naval Engineering Manual.	21-Oct-04
COMDTINST M10360.3B  -  Coatings and Color Manual	12-Jun-01
COMDTINST M10470.10E  -  Rescue and Survival Systems Manual	17-Apr-02
COMDTINST M10550.25A - Electronics Manual	31-Jul-02
COMDTINST M16114.25A - 47’ Motor Lifeboat Operator’s Handbook	02-July-1999
COMDTINST M16114.32  -  Boat Operations and Training Manual, Vol. I	17-Apr-03
COMDTINST M16114.33  -  Boat Operations and Training Manual, Vol. II	17-Apr-03
COMDTINST M16114.5C  -  Boat Crew Seamanship Manual.	16-Sep-03
COMDTINST M16114.37A  -  Defender Class Operator’s Handbook	01-Jun-04
COMDTINST M16672.2D  -  Navigation Rules, International - Inland.	25-Mar-99
ESWBS - Engineering Logistics Center Extended Ship Work Breakdown Structure/ Hierarchical Structure Code
MICA User Guide - Engineering Logistics Center Management Information for Configuration and Allowances User Guide
47B MLB 631-010 REV G, Hull Visual Identification	1-Jun-04
41UT 1901-2 REV A, Hull Visual Identification & Paint Schedule	1-Apr-01
U.S. Coast Guard Navigation and Vessel Inspection Circular (NVIC) No. 5-86, Voluntary Standards for U.S. Uninspected Commercial Fishing Vessels.	14-Jan-94
47’ MLB Video
Functionality Matrix

Authority:   Naval Sea Systems Command (NAVSEA)

Address:     Naval Sea Systems Command

                     1333 Isaac Hull Avenue S. E.

                     Washington Navy Yard, D.C. - 20376

Phone:        (202) 781-0000

Website: http://www.navsea.navy.mil/

Title	Date
NAVSEA 0900-LP-001-7000, Fabrication and Inspection of Brazed Piping Systems.
NAVSEA 0900-LP-060-4010, Fabrication, Welding and Inspection of Metal Boat and Craft Hulls.
NAVSEA S9407-AB-HBK-010, Handbook of Shipboard Electromagnetic Shielding Practices.	1999
NAVSEA OP3565, Vol. II, “Electromagnetic Radiation Hazards (Hazards to Ordnance)”	01 May 2002

Miscellaneous

Title	Authority	Date
Freedom of Information Act (FOIA)	UD Department of Justice
NTIA Manual of Regulations & Procedures for Federal Radio Frequency Management	National Telecommunications and Information Administration	May 2003 Edition, September 2004 Revisions

3. [Orig]  INDUSTRY PUBLICATIONS

Title:            Standards and Technical Information Reports for Small Craft

Authority:   American Boat & Yacht Council

Address:     ABYC

                     3069 Solomons Island Road

                     Edgewater, MD - 21037-1416  USA

Phone:        410-956-1050

Fax:             410-956-2737

Website: http://www.abycinc.org/

Authority:   International Organization for Standardization (ISO)

Address:     International Organization for Standardization (ISO)

1, rue de Varembé, Case postale 56

CH-1211 Geneva

                     20, Switzerland  

Phone:        +41 22 749 01 11

Fax:             +41 22 733 34 30

Website: http://www.iso.org/

Title	Date
ISO 12216.  Small craft -- Windows, portlights, hatches, deadlights and doors -- Strength and watertightness requirements.	2002
ISO 3046-1.  Reciprocating internal combustion engines -- Performance -- Part 1: Declarations of power, fuel and lubricating oil consumptions, and test methods -- Additional requirements for engines for general use	2002

Authority:   The Society of Naval Architects and Marine Engineers (SNAME)

Address:     SNAME

                     601 Pavonia Avenue

                     Jersey City, NJ 07306 USA

Phone:        (800)798-2188

Fax:             (201)798-4975

Website: http://www.sname.org/

Title	Date
SNAME Ship Technical Operation Bulletin 4-16, Calculations for Merchant Ship Heating, Ventilation and Air Conditioning Design.	1980
Principles of Naval Architecture	June, 1967

Authority:   ASTM International (ASTM) American Society for Testing and Materials

Address:     ASTM

                     100 Barr Harbor Drive

                     West Conshohocken, PA  19428-2959

Phone:        (610) 832-9585

Fax:             (610) 832-9555

Website: http://www.astm.org

Title	Date
A269-04 Standard Specification for Seamless and Welded Austenitic Stainless Steel Tubing for General Service	2004
A276-05 Standard Specification for Stainless Steel Bars and Shapes	2005
A312/A312M-04b Standard Specification for Seamless, Welded, and Heavily Cold Worked Austenitic Stainless Steel Pipes	2004
B179-03 Standard Specification for Aluminum Alloys in Ingot and Molten Forms for Castings from All Casting Processes	2003
B210-02  Standard Specification for Aluminum and Aluminum-Alloy Drawn Seamless Tubes	2002
B221-04a  Standard Specification for Aluminum and Aluminum-Alloy Extruded Bars, Rods, Wire, Profiles, and Tubes	2004
B241/B241M-02 Standard Specification for Aluminum and Aluminum-Alloy Seamless Pipe and Seamless Extruded Tube	2002
B33-04 Standard Specification for Tinned Soft or Annealed Copper Wire for Electrical Purposes	2004
B928-04  Standard Specification for High Magnesium Aluminum-Alloy Sheet and Plate for Marine Service	2004
E1032-01, Standard Test Method for Radiographic Examination of Weldments	2001
E1417-05e1, Standard Practice for Liquid Penetrant Testing	2005
E165-02, Standard Test Method for Liquid Penetrant Examination.	2002
E94-04, Standard Guide for Radiographic Examination	2004
F1166-95a(2000) Standard Practice for Human Engineering Design for Marine Systems, Equipment and Facilities	1995
F1836M-97(2002) Standard Specification for Stuffing Tubes, Nylon, and Packing Assemblies (Metric)	2002

Authority:   The American Bureau of Shipping (ABS)

Address:     The American Bureau of Shipping - Corporate

                     16855 Northchase Drive

                     Houston, TX

Phone:        (281)877-5928

Fax:             (281)877-6201

Website: http://www.eagle.org/

Title	Date
Guide for Shipbuilding and Repair Quality Standard For Hull Structures During Construction	1998

Authority:   American Society of Mechanical Engineers International (ASME)

Address:     The American Bureau of Shipping - Corporate

                     Three Park Avenue

                     New York, NY 10016-5990

Phone:        800-THE-ASME

Webpage: http://www.asme.org/

Title	Date
INTERNATIONAL BOILER AND PRESSURE VESSEL CODE	2004
Y14.38 - Abbreviations and Acronyms	1999

Authority:   Illuminating Engineering Society of North America (IESNA)

Address:     120 Wall Street, Floor 17

                     New York, NY 10005

Tel:              212-248-5000

Fax:             212-248-5017/18

Webpage: http://www.iesna.org/

Title	Date
IESNA RP-12-97  Marine Lighting	17 Aug 1997

Authority:   Society of Automotive Engineers (SAE)

Address:     400 Commonwealth Drive

                     Warrendale, PA 15096-0001

Phone:        877-606-7323

Website: http://www.sae.org/

Title	Date
Standard J1942/1, Qualified Hoses for Marine Applications.	12/04
AMSQQA 250/8, Aluminum Alloy 5052, Plate and Sheet	09/98
AMS 2431 Rev. A, Peening Media, General Requirements	09/96

Authority:   The National Electrical Manufacturers Association (NEMA)

Address:     1300 N. 17th Street, Suite 1847,

Rosslyn, VA, 22209

Phone:        (703) 841-3200

Fax:             (703) 841-5900

Website:      http://www.nema.org

Title	Date
NEMA 250-2003, Enclosures for Electrical Equipment (1000 Volts Maximum).	2003

Authority:   American National Standards Institute (ANSI)

Address:     American National Standards Institute (ANSI)

                     1819 L Street, NW, 6th floor

                     Washington, DC - 20036

Phone:        (202)293-8020

Fax:             (202)293-9287

Website:      http://www.ansi.org/

Title	Date
ANSI C84.1  Electric Power Systems and Equipment - Voltage Ratings (60 Hz)	01/01/95
ANSI/EIA Standard 748A	1998

Authority:   American Welding Society (AWS)

Address:     American Welding Society

                     550 N.W. LeJeune Road

                     Miami, Florida - 33126  USA

Phone:        (800)443-9353

Website:      http://www.aws.org/

Title	Date
A5.1/A5.1M:2004, Specification for Carbon Steel Electrodes for Shielded Metal Arc Welding.	2004
B1.11:2000, Guide for the Visual Examination of Welds.	2000
D1.1/D1.1M:2004, Structural Welding Code – Steel.	2004
D1.2/D1.2M:2004, Structural Welding Code – Aluminum	2003
D3.7-04, Guide for Aluminum Hull Welding	2004

Authority:   National Fire Protection Association (NFPA)

Address:     1 Batterymarch Park

                     Quincy, MA

                     USA  02169-7471

Tel:              (617)770-3000

Fax:             (617)770-0700

Website:      www.nfpa.org

Title	Date
NFPA 70: National Electrical Code (NEC)	2005

Miscellaneous

Title	Authority	Date
Recommended Practices 12 and 14	Society of Allied Weight Engineers
IACS Guidelines and Recommendation No.47, Shipbuilding and Repair Quality Standard, Rev. 1	International Association of Classification Societies (IACS)	1999
Recommended Practice No.  SNT-TC-1A	The American Society for Nondestructive Testing (ASNT)
(IEC) 60529 - Degrees of protection provided by enclosures (IP Code)	International Electrotechnical Commission	2001
IEEE-STD-45 Recommended Practice for Electric Installations on Shipboard	Institute of Electrical and Electronics Engineers, Inc (IEEE)	2002
International Maritime Organization (IMO) International Convention for the Prevention of Pollution from Ships (MARPOL 73/78), Annex VI, Prevention of Air Pollution from Ships.	International Maritime Organization	1973-1978
Electronics Industry Alliance  Standard EIA-632	Electronics Industry Alliance	Sep 2003